Thread Content
The gas turbine flowmeter produced by our factory is a precision flow measurement instrument that, when used in conjunction with the appropriate flow accumulation meter, can be used to measure the flow rate and total volume of gas. Due to its strong adaptability, gas turbine flowmeters are often used in various special environments; as a result, their range of applications is very wide, and they are currently a highly popular and in-demand type of flowmeter. So, what should be taken into consideration when using gas turbine flowmeters? 1. During use, the liquid being measured should be kept clean, free of impurities such as fibers and particles. 2. When starting to use the sensor, it should first be slowly filled with liquid, and then the outlet valve should be opened; it is strictly prohibited to expose the sensor to high-speed fluid flow when it is empty of liquid. 3. When the sensor is not in use, its internal liquid should be cleaned, protective covers should be placed at both ends of the sensor to prevent dust from entering, and it should then be stored in a dry place. 4. The transmission cable of the sensor can be installed overhead or buried (an iron pipe should be used when buried). 5. The filter used during operation should be cleaned regularly; when not in use, the liquid inside it should be cleaned as well. Similar to the sensor, it should be covered with a dust cover and stored in a dry place. 6. The maintenance cycle for sensors is generally half a year. During maintenance and cleaning, be careful not to damage the components inside the measurement chamber, especially the impeller. When assembling, pay close attention to the positional relationship between the guide elements and the impeller. 7. Before installing the sensor, first connect it to the display instrument or oscilloscope, power it on, and blow on or manually rotate the impeller to make it spin rapidly in order to check for any indication; only after an indication is observed should the sensor be installed. If it is not displayed, the relevant components should be checked to eliminate the fault. At present, our company is looking forward to the future with great enthusiasm; we are working hard to build a solid foundation, keeping up with the times, and operating in good faith. With top-quality products and excellent services, we are committed to contributing to society and helping to develop China’s automation instrumentation industry. Our future will be shaped through cooperation with you! We will compete in the market by offering high-quality products at competitive prices, along with outstanding service. Our company is eager to work in good faith with customers from all over the world, providing them with enthusiastic, high-quality, and efficient service!