Let’s take a look at how to attach an air supply connector
Thread Content
The interface on the device features M10 external threads, and we need to install adapters for it. Our requirement is that these adapters be used with Φ6 copper or stainless steel pipes. Is there anyone in the forum who can provide some advice?
Internal-threaded metal hoses of the same size and pressure rating
Metal hoses can be found by searching on Baidu; manufacturers can produce them once you provide the specifications and dimensions! It is also possible to avoid using hoses by welding a terminal fitting directly at the interface of the original equipment; for the end connected to the copper or stainless steel pipe, a bayonet-type fitting (Φ6) can be used
Get a terminal connector and weld it directly on
I spent the whole afternoon in the hardware market but couldn’t find anything suitable
What devices are outside? Should I pick a screw thread for Guan Guan? How about an M10? It’s too troublesome; it doesn’t match the connector M10×1 connectors can be found everywhere,,, Well, it’s probably because his mother was ugly and couldn’t find a husband; she must have given birth to him so that he could bring trouble to society as revenge. Sell this junk device as scrap; it’s worthless.
Two methods are preferable: 1. Choose a direct-through terminal socket connector, weld one end directly to the original pipe (the type of thread on the original pipe doesn’t matter; only the outer diameter and wall thickness are relevant), and use the other end to connect a φ6 pipe. 2. Select a double-end collet fitting: one end is connected to the original pipe using a collet (inform the supplier of the outer diameter of the pipe), and the other end is fitted with a φ6 pipe using a collet. The above two methods were chosen because the threaded connection of M10×1 is not easy to secure firmly. Many manufacturers in Yangzhong City, Jiangsu Province produce such connectors; it should be possible to find them by searching online