Liquid level measurement in the electrodesalination tank of atmospheric and vacuum distillation units
Thread Content
I would like to ask the experts: What type of instrument is generally used to measure the level in the electrical desalination tank of a vacuum distillation unit? I would be extremely grateful if you could all share your insights Thank you! ! !
The density difference in the electrodialysis tank is relatively small; therefore, we have chosen a double-flange type with a small measurement range, which offers a good balance between cost and accuracy
This post was last edited by Zhuge Sima Linghu Chong on 2020-2-27 at 19:14. Could you please tell us the brand and model of your double flange? Thank you! Also, let’s talk again about the flange spacing – and does this double flange work well where you are? Is the measurement accurate? Thank you! ! !
The common one is radio frequency admittance. How can the interface be distinguished in the case of double flanges, as answered on the 2nd floor? I haven’t learned this* before.
Well, you’re right; so I want to learn* how to measure this double flange. It’s a pity that the person on the second floor never responds.
Is the space between the two flanges always filled with liquid?
Well, yes, the space between the two flanges is always filled with liquid. Because it measures the interface level. Oil-water separation interface. Strictly speaking, there is also a thin layer between the oil and water, which is the emulsion layer.