Regarding thermometer sleeves
Thread Content
1/16\" bushing, what thread size should I use?
What kind of card holder is this? What is connected to what by being so thin? Which thread is that again?
Is the thread NPT or Rc?
A protective sleeve connected to the thermocouple; the thermocouple used is a 1mm T-type type. No requirements are specified regarding the clamp, so can it be supplied directly by the manufacturer?
It’s normal for the protective tube to be provided by the manufacturer; I’ve never seen one that thin. Just ask the manufacturer to recommend a suitable model.
Manufacturers can produce threads in any size format; the key is that you provide the installation method and parameters
If you provide the parameters for the temperature interface on the equipment, it’s much simpler as the manufacturer can supply the sleeve directly
Could we add each other on WeChat? I’m Xiao Feng from the design institute; I just started working there and am involved in instrument design as well
1/16\" bushing – it’s unlikely to be a threaded connection. .
So thin, I’ve never seen it. It’s so easy to get it directly from the manufacturer – it only costs a few hundred yuan, so it’s not expensive at all