What type of flow meter is used for measuring natural gas used for entry and exit from the plant, as well as for trade settlement?
Thread Content
Seeking advice: What type of flow meter should be used for measuring natural gas used for entry and exit from the plant, for trade settlement purposes? The normal flow rate is 5,000 cubic meters per hour.
Balance flow meter (A+K), gas ultrasonic flow meter, gas turbine flow meter (Zhejiang Tianxin or Cangnan Instrument Factory).
A gas turbine flow meter or a gear flow meter can be used
A gear flow meter will do; it offers a good balance between accuracy and cost-effectiveness
This post was last edited by ZhiGE on 2021-7-29 at 14:54. Different measuring instruments are chosen depending on requirements for technical parameters such as accuracy and range ratio. There must be a design; purchases should be made according to the specification sheet ； Measurement instruments also need to be calibrated to meet compliance requirements.
We have used mass, vortex flow, and turbine (E create ) methods. The gas company uses turbines (E create ), and their secondary meters take into account the compression factor; relatively speaking, turbines provide more accurate readings
For trade settlement, use gas mass flow meters at www.kfdkyb.com
Our natural gas company and our own company use ultrasonic flowmeters for settlement purposes