Main technical specifications of the steel belt type weight level gauge (dual-chamber isolated type)

Thread Content

The steel belt weight-type level gauge can be used to measure the level of powdered, granular, and bulk solid materials in silos, enabling users to accurately determine the level of material within those silos. The level gauge consists of a primary sensor and a control display unit. The design of the sensor incorporates the advantages of similar products available both domestically and internationally; its unique structure and transmission mechanism enable it to overcome the problems that often occurred with many other types of weight-based level gauges, resulting in reliable operation, low maintenance requirements, and wide applicability. Key technical specifications of the steel belt type weight-based level gauge (dual-chamber isolated type): 1. Primary sensor (weight approximately 7.5 kg, installed at an appropriate location on the top of the tank); measurement range: 0~100 meters (customization possible) ； Measurement accuracy: ±0.5% Repeatability: ±0.5% ； Resolution: ±1cm ； Detection speed: 0.15 m/s. Measurement belt: 304 stainless steel belt or 304 stainless steel lined with F46 wire rope. Weight of the weight hammer: 1.5 kg ； Motor stall torque: 5 N.m Power consumption: 45 W during operation (depends on the motor model selected) ； Ambient temperature: -40°C to +60°C Display: Full Chinese touchscreen ； Current output: Active 4~20mA (no external 24V required). Accuracy of current output signal: ±0.5% ； Timing duration: 10~9999 minutes (or as specified by the user). Maximum distance from the sensor: 500m ； Weight of the digital control unit: 0.5 kg. Dimensions of the digital control unit: width 110 × height 110 × length 120 mm. Dimensions of the opening for installing the control unit: width 111 × height 111 × length 130 mm. It can be placed on the top of a storage bin or in a control room. http://www.jswand.com/products_t147.html http://www.jswand.com/ProductShow_646.html