The outdoor flow display and indoor display of the EJX910 transmitter do not match
Thread Content
How can I change the output of this model of transmitter, so as to switch from differential pressure output to flow rate output? Could you please provide detailed steps for using the 475 handheld controller? I’m seeking advice as I can’t solve this issue on my own
The discrepancy between the outdoor flow display and the indoor display of the EJX910 transmitter may be caused by incorrect setting parameters or changes in the measurement environment. To change the output mode from differential pressure output to flow rate output, the 475 handheld controller can be used for setting it. Here are the specific steps: 1. Connect the 475 handheld controller to the HART communication interface of the EJX910 transmitter. 2. Open the 475 handheld device and select the “Configuration” menu. 3. Under the “Configuration” menu, select the “Measurement” submenu. 4. Under the “Measurement” submenu, select the “Output” option. 5. Under the “Output” option, select “Change”. 6. In "Change", select "Output Type". 7. In \"Output Type\", select \"Flow\". 8. After selecting the “Output Type”, go back to the previous menu, save the settings, and exit. The steps mentioned above are only a brief description; the actual operations may need to be adjusted slightly depending on the specific circumstances. If your problem still cannot be resolved, it is recommended that you consult the relevant device manual or seek assistance from professional technical support for more detailed help. .