How to set the time on the operation screen for the Zhejiang University Zhongkong JX300 timer?
Thread Content
How to set the time on the operation screen for the Zhejiang University Zhongkong JX300 timer?
The specific steps may vary depending on the software version or the device, but the general procedure for setting a timer is as follows: 1. Open the operation interface of Zhejiang University’s JX300. 2. Locate the timer function module, which is usually under the main menu or in the parameter settings. 3. Enter the timer setting interface. 4. Enter or select the time you want to set. It may be necessary to set the start and end times of the timer, or to specify a particular delay time. 5. Confirm and save your settings. If the above steps do not help resolve your issue, it is recommended to refer to the user manual for the Zhejiang University Zhongkong JX300 or contact technical support for specific guidance. .
Create a variable, associate it with the timer’s time pin, and then place that variable on the desired screen!