Problems with alkaline desulfurization
Thread Content
Who can tell me what the ratio is between the desulfurization air flow rate and the desulfurization liquid circulation rate? For example, how much air flow should be added to 1,000 cubic meters of desulfurization liquid?
There is no fixed ratio; the amount of air is adjusted as needed based on the amount of sulfur foam produced and the volume of overflow.
How to design a desulfurization scheme based on the sulfur content in the gas and tower parameters?
Website for desulfurization centrifuges: http://289718.ccen.net/
Blowing intensity of the regeneration tower: 70–100 m3/m2·h
It is determined based on the tower, gas volume, and hydrogen sulfide; I can provide you with specific quantitative values. Contact me on QQ: 1123267744
This is determined based on actual conditions; the book states that the air supply density should be 80–120 m3/㎡·h. Calculate it by yourself based on this. WeChat 13739752185, I’ll help you calculate it
The air volume of a 5.5-meter-diameter regeneration tower is approximately 2000 m³/h.