Plant construction plan

Thread Content

This post was last edited by Small and on 2017-7-31 14:13. Plant establishment plan: 1. Set up a company and rent workshop space or factory buildings. 2. Secure the funds and prepare a budget. 3. Recruit staff and train employees. 4. Registration and submission for environmental protection, safety, and fire protection related to the project. 5. Identify the equipment, all static equipment and dynamic equipment. 6. Various valves, instruments, and electrical cabinets. 6. After the process plan is finalized, establish an analysis laboratory, purchase analysis equipment, hire analysts, and conduct preliminary tests as early as possible. 8. Raw material procurement, packaging drums, forklifts. Selection of process equipment, procurement, warranty, maintenance, and spare parts. First, purchase equipment at 25–50% of the designed production capacity to carry out small-scale trial production; once successful, proceed with full-scale procurement and installation in two steps. Second, factory buildings and equipment. The production facility covers an area of about 1,000 m2, is single-story with a ceiling height of 10 meters, and it would be better equipped with a crane. It contains a steel structure platform inside. There are approximately: 4 reactors of 1500L capacity, 8 reactors of 3000L capacity, 2 extraction tanks of 6500L capacity, 2 distillation tanks of 5000L capacity, 1 reactor for finished products of 2000L capacity, as well as coolers corresponding to all of these reactors. 1 x 2000L crude product tank. 2 x 2000L circulating storage tanks. The finished product warehouse and solid raw material warehouse cover approximately 500 m2, the liquid storage tank area covers about 300 m2, and there are 3 hazardous liquid storage tanks with a capacity of 40 m3 each. FRP storage tank 100m3. The gas recovery and emission device area covers approximately 200 m2, while the gas-fired steam boiler room is 150 m2 in size; it is a single-story building with a ceiling height of 10 meters. The accident tank has a capacity of 1500 m3, the sewage tank has a capacity of 500 m3, and the fire suppression tank has a capacity of 1500 m3. Fire water pressure: 0.3 MPa. Water replenishment rate: 100 m3/h. The total water consumption per second for indoor and outdoor fire hydrants is 40 L/s. The auxiliary buildings such as office buildings, power distribution rooms, and spare parts warehouses cover an area of around 500 m2. Power supply is classified as a secondary load, while lighting power is considered a tertiary load; the total power capacity for power supply is approximately 8 kW × 20. All the factory sites cover 5 to 10 mu each – all this work is going to drive me crazy; I’m going to be exhausted. It seems like an impossible task, but it has already begun. After May Day, visit equipment manufacturers and take the opportunity to travel around the world. Friends at home are helping to keep looking for factory premises and securing the funds. Every step is important, and none of the links can be missing. This factory represents the first step in my five-year plan; once this step is completed, it will be like the Chinese armored forces that crossed Lang Son during the Self-Defense Counteroffensive against Vietnam – all that’s left then is to advance.