Flue gas desulfurization and denitration
Thread Content
The flue gas desulfurization and denitrification system of coke ovens requires shutdown for maintenance; how should the flue gas be handled during this period, and what are some good solutions? Need a solution? ? ? :handshake:handshake:handshake
Desulfurization and denitrification processes generally rely on forced circulation. If the treatment equipment needs maintenance, it becomes impossible to treat the flue gases in an environmentally friendly manner, and there will be a lot of smoke in the workshop. Unless there is backup treatment equipment, it will be impossible to meet the emission standards. Therefore, companies usually carry out maintenance work around the clock to speed up the process and minimize the time required.
In small businesses, illegal discharge is all too common.
Is there no backup chimney? We all discharge directly through backup chimneys. Submit an application in advance to the Environmental Protection Agency.
Submit an application in advance to the Environmental Protection Agency for direct discharge
Not all environmental protection facilities operate in a setup-and-backup configuration; for maintenance work on flue gas desulfurization and denitrification, it is only possible to report in advance about a reduction in production, with the amount of waste gas that does not meet standards being minimized
Discharge is not allowed if the emission standards are not met; environmental regulations must be complied with
For calcium hydroxide and calcium oxide desulfurization, feel free to contact me to discuss it