Q&A on Purification Technology Version [021]
Thread Content
How to ensure the tray efficiency of the absorption tower? Answer: 1) Control an appropriate liquid-to-gas ratio ； 2) The levelness of the tray is within acceptable limits, ensuring an appropriate liquid layer height ； 3) No liquid leakage from the tray ； 4) The absorbent has a high purity and is not prone to foaming ； 5) The tray is clean, free of dirt and grime ；
Control the appropriate liquid-to-gas ratio； The levelness of the tray is within acceptable limits, ensuring an appropriate liquid layer height ； No liquid leakage from the tray ； The absorbent has a high purity and does not tend to foam ； The tray is clean, free of dirt and grime.
1) Control an appropriate liquid-to-gas ratio； 2) The levelness of the tray is within acceptable limits, ensuring an appropriate liquid layer height. 3) There is no leakage from the tray ； 4) The absorbent has high purity and is not prone to foaming ； 5) The tray is clean, free of debris and dirt.
1) Control an appropriate liquid-to-gas ratio； 2) The levelness of the tray is within acceptable limits, ensuring an appropriate liquid layer height ； 3) No liquid leakage from the tray ； 4) The absorbent has high purity and is not prone to foaming ； 5) The tray is clean, free of debris and dirt.
This post was last edited by zhuzi2017 on 2017-7-30 at 14:21 to control the appropriate gas-liquid ratio； Ensure liquid layer height ； No liquid leakage from the tray ； High purity of the absorbent
1) Control an appropriate liquid-to-gas ratio； 2) The levelness of the tray is within acceptable limits, ensuring an appropriate liquid layer height ； 3) No liquid leakage from the tray ； 4) The absorbent has a high purity and is not prone to foaming ； 5) The tray is clean, free of dirt and grime ；
Control temperature, pressure, flow rate, and velocity properly
1) Maintain an appropriate liquid-to-gas ratio; 2) Ensure the plates are level enough to preserve the proper height of the liquid layer; 3) There should be no leakage from the plates; 4) The absorbent should be of high purity and not prone to foaming; 5) The plates must be clean, free from any debris or dirt
1) Control the appropriate liquid-to-gas ratio; 2) Ensure that the level of the trays is satisfactory in order to maintain the proper height of the liquid layer; 3) There should be no leakage from the trays; 4) The absorbent should have high purity and not be prone to foaming; 5) The trays must be clean, free from any debris or dirt.
1) Control an appropriate liquid-to-gas ratio； 2) The levelness of the tray is within acceptable limits, ensuring an appropriate liquid layer height ； 3) No liquid leakage from the tray ； 4) The absorbent has a high purity and is not prone to foaming ； 5) The tray is clean, free of dirt and grime.
1) Maintain an appropriate vapor-liquid ratio. 2) The levelness of the tower trays must be satisfactory. 3) There should be no leakage from the tray surfaces. 4) The absorbent should be of high purity and free from foaming. 5) The tray surfaces must be free from dirt and scale, and the liquid layer thickness should be ensured