How much methanol is consumed in low-temperature methanol washing?
Thread Content
Full low-temperature methanol wash: 200,000 Nm3/h of gas flows into the low-temperature methanol wash unit; how much methanol is consumed per day approximately?
The inlet volume to the low-pressure tank is 275,000 cubic meters, with a methanol consumption of less than 26 kg/h
Is this design-related or actual consumption? We designed it for 180,000, but the consumption is 40 kg/h. However, methanol consumption cannot be calculated solely based on gas volume
The designed capacity is 26 kg/h, but the actual value is even lower than that
Hello, our company specializes in methanol distillation. If possible, please leave your contact information so that we can have our technical staff discuss this with you
Our intake air volume is 30W/h, and currently we consume 55 Kg/h of methanol. It’s mainly ammonia crystallization; the long rewarming time has an impact.
Our methanol consumption is 1.3 Kg per ton of ammonia; approximately 3,445 cubic meters of purified syngas require 1.3 Kg of methanol
Our low-temperature methanol washing unit consumes 1.3 Kg of methanol per ton of ammonia; approximately 3,445 cubic meters of purified syngas require 1.3 Kg of methanol
Our low-temperature methanol washing unit consumes 1.3 Kg of methanol per ton of ammonia; approximately 3,445 cubic meters of purified syngas require 1.3 Kg of methanol
Less than 1.3 kg/ton of crude alcohol per hour, more or less