The motor current is unstable, fluctuating constantly, which causes it to shut down
Thread Content
The motor current is unstable; could it be that there’s a problem with the inverter?
There are just three aspects: instrumentation/electrical, mechanical, and process. Elimination method.
What was said upstairs is correct – it refers to issues such as wiring, controlling instruments and meters, and whether the output side is stuck in a locked position
It is usually not a problem with the inverter. If it is a motor issue, this can be determined by listening to the sounds and checking the temperature. It is most likely a process-related problem; disconnect the motor from the load, and use a single motor