Rules or principles for the placement of maintenance boxes
Thread Content
For example, in facilities such as those in the chemical industry, there are many power maintenance boxes installed on site. Are there any standards that specify the principles for determining the placement of these elements? For example, what distance apart they should be, how many per square kilometer, how many for each processing step, what area per layer and how many elements per area, as well as capacity requirements, etc. Thank you!
I answered randomly on my own: for example, based on a radiation radius of no more than 50 meters to ensure that the cables do not cross roads; one unit per floor platform if the area is greater than 50 square meters; increasing the density of installation points based on experience gained from major repairs, with each point having a capacity of no less than 20 kW.....
What is the purpose of the maintenance box? Does it provide temporary power?
Are you telling me to drive a large vehicle and traverse the Helan Mountains?
Do not idle away your time; otherwise, your youth will pass in vain, leaving only sorrow Study hard*, hahaha
I think the general approach should be to establish fire compartments, and as for how many compartments there should be in one area, it’s up to you; there’s no mandatory requirement
Power supply is required for on-site maintenance to ensure safety, reliability, and convenience. They are auxiliary facilities that are installed permanently
The original poster wants to know if there are any regulations, and I want to know too. Our device also has settings; it is said to be part of the design, and after all, there is always a reason behind the design:)