Electrical Technology 2020-6-26
Thread Content
This post was last edited by sdscj0122 on 2020-6-26 08:50. It contains true/false questions based on the \"Power Safety Work Procedures\"; please indicate whether the answer is correct or incorrect. 3 points are awarded for correct answers, 2 points for incorrect ones, and 5 points are required for a detailed explanation of the reasons. 78. Before the maintenance work is completed, and after the test voltage has been applied to the equipment, if the work team needs to continue working, there is no need to go through the work permit procedure again. ( ) Error
Error. Before the maintenance work is completed, and after applying the test operating voltage to the equipment, if the work team needs to continue working, the work permit procedure must be carried out again.
Error. Before the maintenance work is completed, the equipment is tested with operating voltage for debugging. If the work team needs to continue working afterwards, they must go through the work permit procedures again.