[Q&A Question 295] 11.9.2017
Thread Content
【Q&A Question 295】November 9, 2017: What are the responsibilities of a fire supervisor? Responsibilities of the fire supervisor: Responsible for ensuring fire safety at the site where fire is used, once the safety measures have been implemented. 1. Fire supervisors must be familiar with the current process conditions and production procedures, as well as the environment at the site where welding work is carried out ； 2. The person in charge of fire control must be familiar with methods for extinguishing incipient fires and skilled in using various fire-fighting equipment ； 3. Upon receiving the hot work permit, check each safety measure to ensure it has been implemented, verify the specific location where hot work will be carried out, and only after confirming everything is in order sign the permit to authorize the hot work ； 4. The guardian shall provide supervision while holding the ticket. During hot work, one must not leave the site and must remain vigilant regarding the conditions there at all times. In the event of any danger, effective measures must be taken immediately to prevent accidents from occurring ； 5. When the hot work is completed or interrupted, the supervisor shall assist the person performing the work in eliminating any remaining embers; only after inspecting the site to confirm that it is safe can they leave. (Unless otherwise specified, all questions and answers are based on hydrogenation units.) ) For management purposes, if you need to view content from a few days ago, please access it through the summary post below. 2017 Q&A Summary Thread (updates have begun) http://bbs.hcbbs.com/thread-1657793-1-1.html 2017 Daily Question Summary Thread (updates have begun) http://bbs.hcbbs.com/thread-1657794-1-1.html 2016 Q&A Summary Thread (updates completed) http://bbs.hcbbs.com/thread-1597792-1-1.html (Source: Haichuan Chemical Industry Forum)
Responsible for ensuring fire safety at the site where fires are used, once the safety measures have been implemented. (1) The person in charge of overseeing hot work must be familiar with the current process conditions and production procedures, as well as the environment at the site where the hot work is being carried out. (2) The person in charge of fire control must be familiar with methods for extinguishing incipient fires and skilled in using various firefighting equipment. (3) Upon receiving the hot work permit, each safety measure should be checked one by one to ensure they have been implemented; the specific area where hot work will take place must be verified, and only after confirmation should the permit be signed to authorize the hot work. (4) The guardian shall provide supervision while holding the ticket. During hot work, one must not leave the site and must remain vigilant at all times. In the event of any danger, effective measures should be taken immediately to prevent accidents from occurring. (5) When the hot work is completed or interrupted, the supervisor shall assist the person performing the work in eliminating any remaining embers; only after inspecting the site to confirm that everything is safe can they leave.
Monitor whether those performing hot work are operating outside their authorized scope, identify potential hazards, and address them
:Responsible for ensuring fire safety at the site where fires are used, once the safety measures have been implemented. (1) The person in charge of fire operations must be familiar with the current process conditions and production procedures, as well as the environment at the site where work is being carried out. (2) The person in charge of fire control must be familiar with methods for extinguishing incipient fires and skilled in using various fire-fighting equipment. (3) Upon receiving the hot work permit, each safety measure should be checked one by one to ensure they have been implemented; the specific area where hot work will take place must be verified, and only after confirmation should the permit be signed to authorize the hot work. (4) The guardian shall provide supervision while holding the ticket. During hot work, one must not leave the site and must remain vigilant at all times. In the event of any danger, effective measures should be taken immediately to prevent accidents from occurring. (5) When the hot work is completed or interrupted, the supervisor shall assist the person performing the work in eliminating any remaining embers; only after inspecting the site to confirm that everything is safe can they leave.
Ensure safety measures are in place at the site where fire is used, and be responsible for fire safety.
(1) The person in charge of overseeing hot work must be familiar with the current process conditions and production procedures, as well as the environment at the site where the hot work is being carried out. (2) The person in charge of fire control must be familiar with methods for extinguishing incipient fires and skilled in using various firefighting equipment. (3) Upon receiving the hot work permit, each safety measure should be checked one by one to ensure they have been implemented; the specific area where hot work will take place must be verified, and only after confirmation should the permit be signed to authorize the hot work. (4) The guardian shall provide supervision while holding the ticket. During hot work, one must not leave the site and must remain vigilant at all times. In the event of any danger, effective measures should be taken immediately to prevent accidents from occurring. (5) When the hot work is completed or interrupted, the supervisor shall assist the person performing the work in eliminating any remaining embers; only after inspecting the site to confirm that everything is safe can they leave.
Responsible for ensuring fire safety at sites where fires are used, once the appropriate safety measures have been implemented
The fire supervision officer should be a person who is responsible, experienced, familiar with the site, and knows how to extinguish fires; the supervisor must sign the fire permit to give their approval. The supervisor must not leave the site during the operation; in case of any abnormal situation, they must immediately order the suspension of work and contact the relevant personnel to take action. After the operation is completed, together with the person responsible for the hot work and the person carrying out the hot work itself, they must check to ensure that all remaining embers have been eliminated, and only then can they leave the site.
Responsibilities of the fire supervisor: Responsible for ensuring fire safety at the site where fire is used, once the safety measures have been implemented. (1) The person in charge of fire operations must be familiar with the current process conditions and production procedures, as well as the environment at the site where work is being carried out. (2) The person in charge of fire control must be familiar with methods for extinguishing incipient fires and skilled in using various fire-fighting equipment. (3) Upon receiving the hot work permit, each safety measure should be checked one by one to ensure they have been implemented; the specific area where hot work will take place must be verified, and only after confirmation should the permit be signed to authorize the hot work. (4) The guardian shall provide supervision while holding the ticket. During hot work, one must not leave the site and must remain vigilant at all times. In the event of any danger, effective measures should be taken immediately to prevent accidents from occurring. (5) When the hot work is completed or interrupted, the supervisor shall assist the person performing the work in eliminating any remaining embers; only after inspecting the site to confirm that everything is safe can they leave.
Responsible for ensuring fire safety at sites where fires are used, once the appropriate safety measures have been implemented
By implementing proper safety measures, it is possible to handle minor incipient fires and ensure safety when working with fire