The design institute will come tomorrow to guide us in starting up the fluidized bed
Thread Content
If anyone has any questions, feel free to ask; let’s see if we can resolve them
Could you share your process and materials? Want to learn*
You guys work at that factory; remember to share your experience starting up operations
The first question for today is regarding the flow meter at the outlet of the circulation pump; it should be installed at an angle of 45° upward. We only knew that it needed to be installed at 45° downward. As a result, one thousandth of the catalyst in the boiling cup gets carried into the central tube, and installing it at an angle downward can lead to blockages. Also, I didn’t look at the pictures carefully enough.
That’s probably right. I figured that out from the time you posted your message. I’m just an ordinary, overworked engineer at the design institute where this project is being handled – not worth mentioning at all
Let’s work together, friend; I hope you can come and play with us next time
The fluidized bed catalyst is carried out of the reactor under an emergency pressure release of 1.4.