Problems with the drain outlet of the water seal tank
Thread Content
At the top of the large tank for acidic water, there is a safety water seal tank and a positive pressure water seal tank. Previously, the drain outlet of the positive pressure water seal tank was connected to the large tank for acidic water, allowing normal flow of fluid. Now, we want to connect the safety water seal tank as well, but it isn’t possible. Could anyone tell me what the problem is?
It would be best to have a schematic diagram or photos from the site to facilitate problem analysis!
Is the water seal tank two tanks or one tank? Are there any pictures?
It is possible that the pressure inside the acidic water tank is exactly between that of the safe water seal tank and that of the positive-pressure water seal tank. The standard safety water seal height for a water seal tank is 50 mm of water column, with a positive pressure of around 120 mm of water column
Two, one is for safety, and the other is for positive pressure.
Previously, positive pressure was introduced into the tank; now, using safety pressure won’t work.
Where did the safety water seal tank discharge to before? Are there any pictures? Or a picture?