The issue of torch gas recovery volume
Thread Content
The inlet flow rate of the torch gas recovery compressor is 2000 m3/h; according to the technical specifications, the recovery volume is 2000 m3/h under normal conditions and up to 25,000 m3/h at maximum. How should this maximum recovery amount be understood? (The gas holder has a capacity of 5,000 cubic meters).
Is this the maximum emission amount under an equipment failure condition?
In an accident scenario, it should not be recovered but burned directly.
It seems to be the highest emission volume upstream
It seems that this compressor has a very high processing capacity; it must be related to the downstream equipment