Prize discussion — How should samplers for atmospheric pressure storage tanks be installed?
Thread Content
How should the sampler for atmospheric pressure storage tanks be installed? Is it installed on the tank body and connected to the floating disk, with sampling being carried out in segments via a pneumatic pump, or is it installed on the pipeline from the pump’s outlet back to the tank, to circulate the sample? ； Are there any regulatory requirements regarding the installation of samplers at the inlet or outlet of the tank?
It is reasonable to install it on the pump inlet pipeline.
It is reasonable to install it on the pump inlet pipeline.
It is reasonable to install it on the pump inlet pipeline.
Both tank samplers and pipeline samplers can be used, with relevant specifications available.
It is reasonable to install it on the pump inlet pipeline.
There are circulation lines for the tank bottom, pump inlet, and pump outlet return pipes; it depends on the properties of your material
There are circulation lines for the tank bottom, the pump inlet, and the pump outlet return pipe. There is also a sampling device installed on the tank that enables the collection of accurate samples.
It depends on the properties of the material; for most pumps, it’s at the inlet