Issues regarding bottled gas certificates of conformity
Thread Content
All products must be provided with a certificate of conformity; just like the \"one book one certificate\" system, the certificate of conformity for chemical products is also an important document serving as proof of the product’s quality. However, many gas cylinders did not have a certificate of conformity. I would like to know if the certificates are submitted to users in batches? Or make it into a label to stick on the bottle? Anyway, common argon cylinders, oxygen cylinders, and acetylene cylinders do not have qualified labels. So what exactly is the right way to do this?
It seems that this is only a requirement on the part of the users. I remember that back then I made some small pieces of paper and stuck them on one by one before leaving the station. This is a regular gas cylinder; if strict requirements are imposed on the sample gas, then a card must be attached.
The inspection stamp on the gas cylinder is the certificate of conformity
That’s more or less it. No labels will be added unless the user requests it. But as chemicals, they should have chemical labels anyway; all of these can be omitted
That seems to be information related to the gas cylinder. What I want to mention here is the gas in the bottle
For the certificate of conformity regarding the gas inside the cylinder, as mentioned above, small labels can be attached to the cylinder itself; it is necessary to request this from the supplier. Under normal circumstances, a COA – that is, a report confirming that the product has passed testing – is issued at the time of production, based on the quality standards applicable per cylinder or per batch.
There are requirements to display a product certification.
The steel stamp on the gas cylinder serves as its certificate of conformity; as for the gas inside the cylinder, you need to attach a separate certificate of conformity, with the contents determined according to the customer’s requirements. The simplest form of such certificate is a quality inspection label bearing the word \"conformity\". Additionally, if it is a hazardous chemical, a safety label must be attached to the bottle, or it can also be printed on the bottle. That’s why the requirements imposed by urban management on liquefied petroleum gas cylinders are stricter