Is it okay in this case without a diesel fire pump?
Thread Content
Gentlemen, I am a safety manager at a pulp and paper manufacturing plant. Our facility has dual power supplies, and all of the fire pumps are electric; there are no diesel fire pumps. Such a facility poses a significant fire risk, as there are tens of thousands of tons of materials stored there, including paper in the warehouses, as well as wood and straw in the storage areas. In such a situation, is it okay to not have a diesel fire pump?
It’s better to install a diesel fire pump.
The backup pumps in our port’s foam pumping station are powered by turbines, and they have passed all N fire safety inspections.
No way! The diesel pump is used in the event of a power outage
There’s no diesel pump, but there is a generator! Otherwise, the fire inspection will definitely not be passed.
The specifications do not require a diesel pump.
The power supply for fire protection purposes in paper mills should be classified as a secondary load, with a separate power circuit provided. This ensures that fire protection power remains available even when production and domestic electricity supply is cut off in the event of a fire. So it’s better to install a diesel fire pump.
It should be available; otherwise, how can an emergency response be carried out in case of a fire that causes a power outage across the entire plant!
The dual power supply system must ensure that there is no power outage at the same time, and the fire pump must be able to start at any time when it is needed
A backup diesel generator is required to be connected to the fire pump control room for emergency power generation