Guess what caused it and how to deal with it
Thread Content
Guess what caused it and how to deal with it. It’s easy to handle; let’s share it
It’s probably due to inadequate maintenance and poor management
Is it the water entering the bearing housing that causes the oil to emulsify, combined with leakage from the shaft seal?
Possible reasons: 1. Leakage at the bottom discharge port； 2. Check for oil emulsification in the shape, and carry out discharge and replacement.
Like paraffin oil? Mechanical seal leakage~
AY oil pump, high-temperature paraffin oil pump – mechanical seal is leaking
Since the poster says it’s easy to handle, it shouldn’t be a big problem; it’s probably not a leak at the interface.
Has it solidified? Two possibilities~~ 1. Oil seal leakage + external seal leakage~~~~~ 2. Water ingress into the bearing box~~~~~~~~