Selection of 1.5m3/h pump
Thread Content
For liquids with low viscosity and impurities, what type of pump should be chosen? Traffic 1.5
Provide more operating condition parameters, such as flow rate, head, medium temperature, specific gravity, etc
The flow rate is 1.5 m3/h; the medium is a liquid containing some wood chips as impurities, and the temperature is at room temperature. The main task is to determine what type of pump to use first.
The flow rate is 1.5 m3/h; the medium is a liquid containing some wood chips as impurities, and the temperature is at room temperature. The main task is to determine what type of pump to use first.
For centrifugal pumps, the poster needs to provide more operating conditions: head, and properties of the medium.
Choose a diaphragm pump – it’s cheap and effective.
Can a centrifugal pump achieve a flow rate of 1.5? With such low flow rate, isn’t a positive displacement pump necessary?
Centrifugal pumps can achieve this, so you need to provide more operating conditions in order to select the appropriate pump type.
Select the appropriate centrifugal pump based on the impurity content, hardness, and maximum particle diameter; for larger particles, an open impeller should be used
Refuses to say the head? There is a significant difference between the pump types selected for a head of 10 meters and one with a head of 100 meters