Handling of damaged filter screens
Thread Content
When the filter mesh comes loose or becomes deformed, we usually fix it by cutting wires to secure it. Do anyone have any good methods for fixing it or other ways to modify it?
Analyze the specific structure in detail! Aiming to solve problems!
Here, there are specialized machining manufacturers available for repairs
In filtration equipment, filters are components that need to be cleaned and replaced; therefore, special devices for quick installation and removal should be designed. If they are inexpensive when purchased, this can help save costs.
The function of the filter screen is to block certain debris. The pore size varies under different operating conditions. The detachment of the filter screen is usually caused by welding damage or deformation. Welding damage is a quality issue, while deformation is caused by debris impact or excessive resistance from the filter screen. It is recommended to first determine the cause of the damage before taking action to identify and fix it.
It is necessary to determine what type of filter it is; deformation is mainly caused by dirty media or overly fine filters, while detachment is primarily due to poor construction. The cause needs to be analyzed based on the specific type of filter (Y-type, basket type, funnel type).