Thread Content
1. Removable: The detachable closed-type cooling tower is easy to disassemble and assemble; it is extremely simple to remove scale – simply take it apart for cleaning, which does not affect the tower’s structure. The scale can be removed completely, allowing the tower to return to its original condition and thus maintaining high operational efficiency； 2. Water conservation: The detachable closed tower increases the proportion of air convection heat transfer; even in cold seasons, direct dry air cooling can be achieved, reducing water consumption. 3. Anti-freezing: In extreme low-temperature conditions, when operating at temperatures below 0°C and there is a sudden shutdown, even if the system freezes, the pipes will not burst and the equipment will not be damaged. 4. Long service life: The seals only need to be replaced every 5–10 years, and the cost of this replacement is less than 10% of the total cost of the tower. With repeated replacements, it can be used for over 20 years. The main heat exchanger frame is made of carbon steel with a thickness of over 30 mm; the tightening bolts are made of 304 stainless steel, approximately M30 in size, while the nuts are made of brass, allowing them to be used indefinitely. 5. Energy savings: The heat exchange efficiency of corrugated plate exchangers is 5–8 times that of circular tube exchangers, resulting in high overall heat exchange efficiency; this allows for energy savings of over 50% on fan consumption. The flow rate of the spray water can be reduced to 30-40% of that of the circulating water, and the energy consumption of the water pump is also significantly lowered.