Thread Content
This afternoon I saw news about the sandstorm in Golmud – it was all over the news. Sandstorms are a common type of extreme convective weather phenomenon in the northwest region during the transition from spring to summer. Has the chemical plant suffered any damage? Were any measures taken to deal with the situation? Let’s all discuss this
The impact is minimal; it affects the raw materials and the on-site environment
During the feasibility study phase of a project, various factors need to be taken into consideration. For selecting the load for each device, geographical conditions are the top priority! During the production period, there must be various contingency plans!
The most likely scenario is a voltage fluctuation that causes a power surge – the motor trips off and the equipment stops working; afterwards, the site has to be thoroughly cleaned again. Keep it up, guys :handshake:handshake
Yes, this is a significant risk. Are there any preventive measures?
It’s hard to anticipate such things; be careful of falling objects from heights during strong winds. . . In production operations, strict precautions must be taken to avoid power fluctuations, and emergency plans for power outages should be in place ; Pay attention to hygiene at the site; those with cooling towers should be aware that the water quality is likely to not meet the standards
The power of enterprises is too weak; it’s a social problem, a ** problem, a human problem. Great efforts should be made to address it.