The lifting of the first steel structure component in the compressor building of Nantong Blue Sea New Materials’ FDPE plant was completed successfully

Thread Content

On November 15, the lifting of the first steel structure component in the compressor building of the FDPE unit at Nantong Blue Sea New Materials, operated by the fifth branch company, was successfully completed. This marks significant progress in the construction of this unit, laying a solid foundation for the efficient advancement of the project going forward. As an important component of the FDPE facility, the installation of the steel structure for the compressor building is a preliminary step in the entire project construction; the success or failure of this initial installation directly affects the progress of subsequent key tasks such as the installation of pipelines, the main framework, and equipment. To ensure the first lift is successful, the full-density polyethylene project team at Nantong Blue Sea New Materials placed great emphasis on this task and organized it carefully. The construction team developed a specialized plan in advance and conducted multiple simulations, carefully checking each of the key technical parameters to ensure that the entire construction process remained scientifically controlled. Before lifting, the project team conducted a thorough quality inspection of the steel structural components, carefully verifying each aspect in accordance with standards – from flaw detection of steel beam welds and the precision of joint fabrication to the control of bolt hole alignment. The construction team adopts checklist management and phased control to ensure \"zero errors\" at every stage. In terms of safety management, the project department adheres to the principle of \"safety first, prevention foremost,\" conducting thorough inspections of potential safety hazards in the construction area and addressing them in advance. Visible warning signs should be installed in the area where steel structure lifting operations take place, and safety officers should be assigned to monitor these operations on site at all times. At the same time, technical personnel provided detailed safety instructions for the lifting operations and checked each connection point of the components to ensure the stability and reliability of the work at heights. On the day of lifting, the personnel in various positions worked closely together and coordinated in accordance with instructions; the steel components were lifted slowly, rotated smoothly, and placed accurately. The entire process was safe and well-controlled, with a steady pace, which fully demonstrated the professional competence and efficient execution ability of the project team. The successful lifting of the first steel structure not only served as a signal to launch full-scale efforts to advance the project at an accelerated pace, but also provided valuable construction experience for the subsequent installation of large-scale steel structures, laying a solid foundation for meeting the project’s overall timeline goals. Next, the project team will advance the construction progress with higher standards and stricter requirements, to ensure that the FDPE plant at Nantong Blue Sea New Materials is completed and put into operation as soon as possible, delivering a satisfactory result to the client.