Basic components of a wire stripping machine:
Thread Content
Wire exit wheel pressure adjustment knob: Used to adjust the pressure of the wire exit wheel on the wire stripping machine; pull it out and rotate counterclockwise to increase the pressure at the exit wheel, and pull it out and rotate clockwise to decrease the pressure at the entry wheel. (It is determined by the strength of the wire coating; in other words, it depends on how easily the stranding machine can remove the coating – if it’s difficult, the pressure increases, while if it’s easy, the pressure decreases.) Stranding machine feed wheel pressure adjustment knob: This knob is used to adjust the pressure on the feed wheel of the stranding machine. Turning it clockwise increases the pressure on the feed wheel, while turning it counterclockwise reduces that pressure. (Determined by the strength of the wire’s insulation; that is, the easier it is to remove the insulation, the less pressure is required, while the harder it is, the more pressure is needed.)
What does the original poster mean? What problem do they want to solve? However, this reminds me of the winding process for wrapping gaskets; the winding force applied by graphite strips and steel strips can be adjusted and controlled in high-quality machines. It seems to be a matter of feedback from torque motors