Recommendations for carbon dioxide compressors
Thread Content
Carbon dioxide compressor, intake pressure of -0.06 MPa, exhaust pressure of 0.02 MPa, intake temperature below 40 degrees, exhaust volume of 700 Nm3/h. Looking for recommendations on suitable compressor types and manufacturers
The pressure here isn’t high; the pressure ratio is 3, and the displacement isn’t large either. Reciprocating or screw types would work fine
This post was last edited by zxf760718 on 2015-7-26 08:21. Contact me; you can message me privately. Thank you
The flow rate is low, making centrifugal separation unsuitable; reciprocating or screw types are recommended. Reciprocating types have low operating costs but high maintenance requirements, while screw types have high costs but low maintenance needs.
One can choose between small reciprocating compressors or screw compressors: For reciprocating compressor manufacturers, domestic options include Shenyu, Yuanda, and Dachuan; for screw compressor manufacturers, there are Fusheng, Shouli, and others