What if the main fan motor burns out?
Thread Content
Ah, June has not been favorable – what should have been a smooth production process had to be halted due to the burnout of the main fan motor. Such an unusual situation forced us to stop operations. I’m reaching out to all of you for help; there’s no spare part available right now. I apologize for troubling everyone, but I still need your assistance. Motor model: YK2600-2, 10,000 volts
Contact large motor repair manufacturers to see if there are alternative motors available.
30,000–400,000 – it usually doesn’t break
I’m sorry, but no – standard-compliant equipment usually doesn’t have them
Our factory encountered the same problem: the main fan motor, with a capacity of 2800 KW and an asynchronous type equipped with a soft starter, was manufactured in Nanyang. Due to high starting currents and improper design, the rotor end rings of the motor melted, so it had to be sent to the manufacturer for repair
It will take about 20 days to finish the repair, I guess; it’s a forced major repair
I don’t know what the startup method is? That manufacturer
The key is that the frame number must be the same, and there should be a replacement motor. Contact a few more companies.
This post was last edited by in the blink of an eye on 2015-6-21 20:24; let’s carry out a major repair – take this opportunity to carefully inspect and replace key equipment such as the fiber mist remover.
Sponsor 5 million, and we’ll carry out a major renovation