Feasibility of installing a condenser on top of the storage tank, with a breather valve connected to the condenser
Thread Content
To prevent pyridine in the pyridine storage tank from leaking out through the vent valve, can it be feasible to install a condenser between the pyridine storage tank and the vent valve, connecting the vent valve to the condenser?
It should be possible to add it, but be careful of the issue of condenser blockage
Sure, no problem. . . .
It seems to work, but the actual effect is poor; the best approach is to use a water seal
The breathing valve must remain unobstructed; otherwise, pressure will build up inside the tank, which is dangerous. The water seal probably won’t work
Our plant’s butyraldehyde storage tank was originally equipped with chilled water condensation, but the results were not satisfactory
Could the poster provide the manufacturer of the storage tank condenser? We here also want to join.