Valves with different connection methods on both sides
Thread Content
Is there any type of valve (electric valve) that has different connection methods on each side – flange connection on one side and clamp connection on the other?
This should be possible, but I really have never seen it.
A special production method, mainly due to the buyer’s requirements
I’ve seen valves with flanges on one side and welds on the other
It should be a special valve; ask the valve manufacturers, they should know
I’ve never seen this special valve; please upload a picture so I can take a look.
If costs are not a concern, as long as the requirements for the connection method are specified, manufacturers can produce it.
Ordinary valves can be designed with a flange on one side and a clamp on the other. Electric valves may also have ones.
Electric valves have not been used, but root valves on instruments are often employed
It’s doable; it’s not difficult. . .
Personally, I think using fittings to make the conversion will solve the problem, unless the space is extremely tight, but such cases should be very rare.