Thread Content
This post was last edited by HSLJHZ on 2016-1-27 at 09:54. In order to increase the popularity of the heat exchange section, a \"Question of the Day\" activity has been introduced in the tower equipment section; this helps to foster active technical exchanges while also providing members with financial rewards. This is a trial post by a beginner; please offer plenty of guidance. 【Daily Question】 (Multiple-choice question) The internal components of a tower generally refer to the removable parts used within the tower to carry out separation processes, including trays, packing, distributors and redistributors, mist eliminators, packing support plates, ( ), anti-backflow baffles, baffles, pipes, pipe fittings, tube boxes, and liquid collection tanks inside the tower. A) Bed limiter B) Tray support ring C) Packing pressure plate D) Clamps and brackets Correct answers: A) Bed limiter C) Packing pressure plate. The reason is as follows: Internal tower components and accessories are two concepts that are easily confused with each other. Internal tower components generally refer to the removable parts used within the tower to carry out separation processes, including trays, packing, distributors and redistributors, mist eliminators, packing support plates, bed limiters, packing pressure plates, anti-backflow baffles, baffles, pipes, pipe fittings, pipe boxes, and liquid collection tanks within the tower. Attachments to the tower refer to components that are welded to the vessel wall and provided by the tower manufacturer. When classified by the location of the attachments, they are sometimes also referred to as internal and external weldments, denoting the attachments inside and outside the tower respectively. Typical accessories inside the tower include support rings, bolted connectors and clip support rods, beam frames (also known as beam bases), clamps, and brackets. Post your answer as a reply; participating in the quiz earns you +2 wealth points (automatic addition of wealth points is enabled – no additional points or comments will be given if your answer is incorrect). If you answer all questions correctly, you’ll receive an additional +3 to +8 wealth points. Extra rewards will also be given for thorough analysis and explanations of the questions or answers, or for detailed calculation processes. If your answer is correct and your analysis and explanation are accurate, it will be marked as the best reply (or the best assistance). Feel free to answer the questions. Note: We will close this post after 24 hours to announce the answers and explanations, as well as the best response (the best help provided). Charisma Reward: If you post a topic in this section within two days to provide a detailed explanation of the knowledge points covered in this question, please reply to this post to inform us, and we will have a moderator grant you charisma points. It is not allowed to simply copy and paste; original content is preferred, with at least some organization by the user along with personal insights and opinions. After registration, we will rank participants based on the content of their posts: the last-place contestant will receive +1 charm, the second-to-last +2 charm, and so on, with the highest score earning +5 charm.
(Multiple-choice question) The internal components of a tower generally refer to the removable parts used within the tower to carry out separation processes, including trays, packing, distributors and redistributors, mist eliminators, packing support plates, (A, B, C, D), anti-overflow baffles, baffles, pipes, pipe fittings, tube boxes, and liquid collection tanks inside the tower. A) Bed limiter B) Tray support ring C) Packing pressure plate D) Clamps and brackets
The internals generally refer to the removable components within a tower that are used to carry out separation processes, including trays, packing, distributors and redistributors, mist eliminators, packing support plates, (AC), anti-backflow baffles, baffles, pipes, pipe fittings, tube boxes, and liquid collection tanks inside the tower.
B) Tray support ring C) Packing pressure plate D) Clamps and brackets
All three of ABC are included, while the fourth one is not quite certain.
C) Packing pressure plate D) Clamps and brackets
Choose ABC. Frequently involved in manufacturing tray supports and installing tubes for internal tower components
A) Bed layer limiter C) Packing pressure plate