Shanghai Qili: Daily maintenance of sludge treatment equipment

Thread Content

This post was last edited by ztj1118 on 2015-9-25 at 10:50. The maintenance of machinery is an extremely important and regular task that must be carried out in close coordination with operations and inspections; dedicated personnel should be assigned to carry out routine checks. In daily maintenance, the following points should be addressed: 1. Bearings bear all the load of the machinery, so proper lubrication is crucial for extending their lifespan. It directly affects the machine’s service life and operational efficiency; therefore, the lubricating oil used must be clean, and the seals must be in good condition. 　　2. When an increase in the bearing oil temperature is detected, the machine should be stopped immediately to investigate the cause and eliminate it. 　　3. If there is a knocking sound when the rotating gear is in operation, stop the machine immediately, check the cause, and eliminate it. 　　4. Newly installed wheel rims are prone to loosening, and they must be checked regularly. 　　5. Check whether all parts of the machine are working properly. 　　6. Pay attention to checking the degree of wear on the parts that are prone to wear, and replace the worn parts as needed. 　　7. The surface of the base frame on which the moving mechanism is placed should be free of dust and other debris, so that when the machine encounters materials that cannot be crushed, the moving bearings can still move within the base frame, thereby preventing serious accidents. 　　Qi Li’s business areas mainly include the following sectors: treatment of municipal sewage and industrial wastewater; the food and beverage industry; industries related to fine chemicals; as well as the field of professional control and instrumentation. Qi Li Environmental Protection possesses a first-class technology center, equipped with comprehensive technical capabilities in research, development, pilot testing, and system integration. It also has various hardware facilities and software resources for testing and inspecting complete systems as well as their components. Address: Room 412, Xianglu Building, No. 3009 Gudai Road, Minhang District, Shanghai.