Question about container thickness for 0.2 MPa
Thread Content
I want to design a low-pressure autoclave with a volume of 18 cubic meters, operating at a pressure of less than 0.2 MPa and a temperature below 130 degrees. What materials and what thickness would be suitable? :)
The poster had better turn to a design firm,,,
1. First, determine the size, structure, and material of the device, then determine the thickness. Material 304 is fine; it’s a sanitary-grade material.
The medium isn’t specified clearly, so it’s not possible to choose the material. The approximate geometric dimensions aren’t provided either, such as length, width, and height.
The original poster should first look at similar devices and then state the requirements; otherwise, no one will be able to answer your question.
I don’t know the specifications, so I can’t calculate it. As for the material, it needs to be chosen based on your medium.