What is the reason why the helical gear does not rotate?

2015-11-18View Original

Thread Content

What is the reason why the helical gear does not rotate?

Reply #22015-11-19

1. The medium is too dirty and has jammed the gears! 2. Inadequate maintenance, or other factors, cause increased mechanical wear and resistance!

Reply #32015-11-19

1. There are debris in the pipeline. 2. The liquid under test contains many impurities. The filter is damaged. Impurities enter the table

Reply #42015-11-19

① Debris enters the gauge, causing the epicyclic gear to get stuck. ② Bearing wear causes the bevel gears to collide with the inner wall of the metering box, leading to jamming. ③ The filter cartridge of the filter has not been cleaned for a long time (the pressure difference exceeds 100 kPa), and the filter mesh is clogged, preventing fluid from passing through.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Quick Links