What type of control valve is used for chloroacetic resin?
Thread Content
The viscosity of chloroacetic resin is quite high; what type of control valve would be suitable?
This post was last edited by Sammy_Wang on 2015-12-2 at 16:29. If the viscosity of the medium is quite high, it is recommended to use ceramic control ball valves made of zirconia; thanks to their inherent lubricity, they allow the medium to be automatically scraped away during the opening and closing of the valve, preventing it from remaining on the valve’s sealing surface. If you have any more questions, feel free to contact me via private message
V-type ball valve with ceramic lining from an imported brand. It can solve the problem. You need my help. Please send me the technical parameters and the data sheet for operating conditions. My QQ is below the reply page.