Experts, please help! It’s about the issue of rising pressure inside the reaction vessel!
Thread Content
I hope the experts here can help me solve a problem: The process is carried out at atmospheric pressure. What should be done if the pressure inside the reactor increases slightly during production and the vent pipe gets blocked?
Clear the vent pipe......
In batch operation, regularly purge the vent line. If the overpressure is high, it is still necessary to install a safety valve or rupture disc
Stop feeding; resume operation after the fault is resolved
How much is a slight increase? If possible, install a ball valve on the spare outlet to allow manual pressure relief in case of overpressure.
Your question is quite vague; it’s necessary to figure out what is causing the blockage, the effects of increased pressure, and the properties of the material, among other things
Just open any feed port, and it will be at atmospheric pressure.