Steps and methods for cleaning heat exchanger fouling
Thread Content
Steps and methods for cleaning heat exchanger fouling 1. Circulating cleaning method: Circulating cleaning involves using a pump to drive the cleaning agent in a circular motion. The cleaning equipment mainly consists of a circulation pump, a cleaning tank, a flow control valve, and cleaning connection pipes. Suitable for enclosed, hard-to-disassemble system equipment. 2. Soaking and cleaning method: This approach makes use of the unique wetting and penetrating properties of cleaning agents to remove and break down the scale that adheres to the surface of the machine. The soaking method is relatively simple; all that is needed is a soaking container with a certain volume. Suitable for some widgets or sealed systems that cannot be cleaned cyclically. 3. Spraying/wiping cleaning method: For flat devices with a large surface area, a spraying cleaner can be used to soak the scale layer, after which the scale can be removed by rinsing or wiping. 4. Comprehensive cleaning method: In many cases, in order to save time on cleaning, reduce the amount of cleaning agents used, and ensure effective cleaning, one or several methods are often employed together to carry out the cleaning process. I hope fellow sailors will offer their guidance and provide valuable suggestions.
There are such specialized cleaning agents available on the market; it’s not convenient to mention them here... Just do a search on Baidu and you’ll find plenty of them.
We use a physical cleaning method, with direct high-pressure water jets.
Fushitek cleaning agent, right? :Lol, be careful – it might be a setup
:I’m being wronged······, it’s such a huge injustice. My major is materials science. This is just to share and communicate with everyone····
Haha, I work in the cleaning products industry; I’m using your platform to promote my products! The product you mentioned is very similar to ours! Feel free to contact me if you need it! Micro: Azsyx1314
From your title and the content inside, I’m not sure what needs to be discussed.
Isn’t it a good idea to install a filter before the heat exchanger? EJS self-cleaning filter: it cleans itself automatically while filtering, removes residues automatically, and ensures a continuous filtering process ；