SIS system configuration issue
Thread Content
Must an operation station be configured for the SIS system?
No need, an engineer station is sufficient
No operation is needed for SIS; it operates automatically, and it works whether there is an operation station or not
It depends on what project it is. If it is controlled by an ITCC compressor unit, then an operator station is necessary ； If not, actually having engineer stations is sufficient; things like interlock bypassing and resetting can be handled through SIS via DCS communication.
I don’t understand this :) I’ll learn it a bit
SIS generally does not require an operator station; an engineer station is sufficient.
How can one determine whether a facility is equipped with a SIS or not?
Check the SIS handover documents and the hardware equipment
The 4th floor is the correct answer; for SIS, an engineer station is usually sufficient
Process personnel do not operate the SIS; there is no need for an operation station – only an engineer station and an SOE station are required
The engineer station is sufficient; other operations are carried out on the DCS, while interlock shutdown is handled at the engineer station. Setting permissions is all that’s needed