【Daily Question】Chemical Engineering Principles 354: Resin Working Layer (April 5)
Thread Content
The Chemical Engineering Theory section is launching the \"One Question per Day\" campaign starting today, aimed at helping everyone reinforce their basic knowledge in chemical engineering. Subsequent series will include those on \"Principles of Chemical Engineering,\" \"Mass Transfer and Separation,\" \"Thermodynamics in Chemical Engineering,\" and \"Chemical Process Engineering.\" We hope you will give it your active support! Wishing you a happy Christmas! Answers to the questions in the \"One Question per Day\" campaign can be viewed directly by replying to the post, and the thread will be closed after 1 day ! To encourage everyone’s continued participation this year! You get 3 wealth rewards just for participating, and an additional 4 wealth points for correct answers~~~ Short answer question: What is the working layer of ion exchange resin? Answer: When water flows through the resin layer, due to the limitations imposed by the ion exchange rate, it takes a certain distance through the layer before the ion concentration in the water can be reduced to the desired level; this is what happens during this process. Ions in water continuously diffuse into the interior of the resin particles; this layer of resin is commonly referred to as the working layer.
As the water flows through the resin layer, due to the limitations imposed by the ion exchange rate, it takes a certain distance through the layer before the ion concentration in the water can be reduced to the desired level. During this process, macromolecules in the water continuously diffuse into the interior of the resin particles; such a resin is commonly referred to as the working layer.
As water flows through the resin layer, due to the limitations imposed by the ion exchange rate, it takes a certain distance through the layer before the ion concentration in the water can be reduced to the desired level; this is what happens during this process. Ions in water continuously diffuse into the interior of the resin particles; this layer of resin is commonly referred to as the working layer.
Ion exchange resins are insoluble polymer compounds with a network structure and functional groups (active groups that can exchange ions). They are usually spherical particulate matter. Its working layer is the exchange layer, which is the place where ion exchange takes place!
This layer is the region within the entire resin layer where ion exchange is taking place
What is an ion exchange resin working layer? Ion exchange resins are a class of polymer compounds with functional groups in a network structure; they consist of an insoluble three-dimensional network framework, functional groups attached to this framework, and exchangeable ions carrying opposite charges on those functional groups.
The resin working layer is the part of the resin bed where ion exchange, adsorption, and other reactions take place.
The working layer of the ion exchange resin: This is the layer within the entire resin layer where ion exchange takes place. In this layer, calcium ion exchange resin and sodium ion exchange resin are present together, with more calcium ion exchange resin in the upper part and more sodium ion exchange resin in the lower part. As water flows through this layer, Ca2+ and Na+ ions in the water undergo exchange, resulting in the Ca2+ concentration in the effluent being reduced from the original concentration to 0. The height of this layer corresponds to the width of the exchange zone.
In the middle section of the resin treatment tower, the area where the resin exchanges ions with those in the water – that is, where the dissociable groups on the resin exchange places with the ions in the solution – is known as the resin working layer, or resin exchange layer. In this area, the ions in the solution bind to the groups on the resin that have an opposite charge, thereby remaining attached to the resin, while the ions that are released from the resin end up in the solution.
Performing ion exchange allows the height of the regenerated dendrogram to be calculated through penetration
It is a traditional water treatment process that involves the displacement of various anions and cations in water using anion and cation exchange resins