【Safe Working Materials】Classification of unsafe conditions! Feel free to add more! !

Thread Content

This post was last edited by q2774594 on 2016-7-3 13:56. (1) Lack of or defects in protection, insurance, signaling, and other devices 　　1. No protection: No protective cover； No safety protection device ； No alarm device ； No safety markings ； No guardrail or damaged guardrail ； (Electrical) Ungrounded ； Poor insulation ； The fan lacks a noise reduction system, resulting in high noise levels ； Working in a dilapidated building ； No bollards or barriers to prevent vehicles from driving through are installed ； Others ； 　　2. Inadequate protection: The protective cover is not in the proper position ； The protective device is not adjusted properly ； Improper support during tunnel excavation and borehole drilling ； Improper explosion-proof device ； The safety distance for logging and log gathering operations is insufficient ； There are defects in the concealed locations for blasting operations ； The live parts of the electrical installation are exposed ； Other. (II) Defects in equipment, facilities, tools, and accessories 　1. Improper design and structure that do not meet safety requirements: Passage doors blocking the line of sight ； The braking system is defective ； The safety distance is insufficient ； The barrier net is defective ； The workpiece has sharp burrs and rough edges ； The fixture has sharp chamfers ； Others ； 　　2. Insufficient strength: The mechanical strength is not adequate ； Insulation strength is insufficient ； The ropes used for lifting heavy objects do not meet safety requirements ； Others ； 　　3. The equipment is operating in an abnormal condition: It is running while faulty ； Overloading ； Others ； 　　4. Poor maintenance and adjustment: Equipment in poor condition ； The ground is uneven ； Poor maintenance, faulty equipment ； Others. (III) Lack or defects in personal protective equipment (protective clothing, gloves, goggles and face shields, respiratory protection, hearing protection, safety belts, safety helmets, safety shoes, etc.): No personal protective equipment or supplies available ； 　　The protective equipment and tools used do not meet safety requirements. (IV) Poor environmental conditions at the production (construction) site 　　1. Poor lighting: Insufficient illuminance ； The work area is filled with smoke and dust, making it difficult to see clearly ； The light is too strong ； 　　2. Poor ventilation: No ventilation ； The ventilation system is inefficient ； Short circuit due to airflow ； Blasting operations during power and wind outages ； Blasting operations carried out when gas emissions do not reach safe concentrations ； Gas level exceeds limit ； Others ； 　　3. Narrow working space ； 　　4. Messy work area: Tools, products, and materials are stored in an unsafe manner ； Others ； 　　5. The layout of traffic routes is unsafe ； 　　6. The design or configuration of the operating procedures is unsafe ； 　　7. Slippery surface: Oil or other liquids on the surface ； Covered in ice and snow ； There are other slippery objects on the ground ； 　　8. The storage method is unsafe ； 　　9. Improper environmental temperature and humidity.