Should hydrogen be compressed first or dried first?
Thread Content
Electrolytic hydrogen needs to be compressed and dried: Before compression: 0.1 MPa, room temperature, with saturated water; After compression: 3.0 MPa, 80°C, with water content
Dry first and then compress; compressing with moisture is harmful to the compressor, as it can cause collisions with the cylinders and damage the equipment
Dry it first, otherwise it’s not good for the press
Dry it first and then compress it, but drying may not remove all the saturated water; I personally recommend compressing it first and then drying it.
Reciprocating compressors are most sensitive to water in the liquid. It’s best to dry it first