For imported and domestic industrial online pH meters, do you have any good suggestions?
Thread Content
Given that the glass electrode of pH meters tends to break easily, are there any new technologies available that can replace it? If not, then... By choosing products from a certain brand, their service life can be extended to some extent. Thank you all.
Please understand its principles in depth. For vulnerable parts, considering adding protective devices is advisable.
It also depends on the operating conditions and maintenance; imported ones might develop problems in about 3 months as well, and we have encountered such cases. It’s just that the price of imported products differs greatly from that of domestic ones; in some cases, the difference is dozens of times:Q.
Yes, mainly I just want to recommend some brands that might be good.
Toledo? The key is to calibrate it each time as required, and store it in maintenance solution after use. I haven’t played in a few years, so I’ve forgotten a bit; hope this helps.
To be honest, given the harsh conditions in which analytical instruments operate, with regard to the media being measured and the working environment, I think it’s better to opt for imported models. For instruments like pH meters, when the operating conditions are severe, the pH electrodes need to be calibrated every three months or so; in the case of lower-quality electrodes, they need to be replaced after about three months. For imported brands of analytical instruments, you can consider companies such as Hach and E+H, but these come at a higher price. I’ve used a pH meter imported from the UK for a client before, and the client was satisfied with it; its price was also reasonable. If you’re interested, I can send you some information for your review
Thank you to the original poster for their generous sharing; email: 3517454386@qq.com
Thank you to the original poster for their generous sharing; email: 3517454386@qq.com
Thank you for the selfless sharing; contact 3157454386
There are too many nuances involved in this thing