How to convert superheated steam into saturated steam.
Thread Content
As the title suggests, a simple and cost-effective method. How much will it cost? 0.5mpa superheated steam converted to 0.5mpa saturated steam
This post was last edited by ylb913 on 2016-8-23 07:08 to remove deoxygenated water. Our factory has two methods: one is to use a temperature reduction and pressure reducing device (in fact, only its temperature reduction function, namely the water injection nozzle, is used here), but the challenge lies in selecting the right model – if the appropriate size isn’t chosen, it’s not possible to reduce the temperature to the saturated level. Secondly, after the soda is mixed (with temperature-controlled water addition), a soda separation tank is added later, and this will definitely become saturated.
Water injection is the most effective method and also economical. Temperature and pressure reduction units have high requirements for equipment quality, and some fail to meet these requirements.
Superheated steam is introduced into the liquid phase of the gas-liquid separation tank to control the pressure in the gas phase; the gas that emerges is saturated gas
Water injection is the most effective method and also economical.