Can the feedback from Siemens and Metso be changed?
Thread Content
The drawing requires 4 mA feedback and 100% feedback, 20 mA feedback is 0, but after I debugged it, the default 4 mA feedback is 0 and 20 mA feedback is 100%.
Do you think the display on the DCS host computer is reversed, or the locator itself displays reversed?
The current feedback of 4 millimeter safety opening status is 0. I want to change it to 4 millimeter safety opening feedback of 100.
Change the forward and reverse functions of the positioner, or try changing the output to reverse in the configuration.
Correction does not work and the output is different. How to change the configuration?
Feedback is not a separate feedback connected to the signal generator.
Change these two places on Siemens SIPART PS2: The two parameters of 7 and 38 may be different in different models, but these two parameters are changed to increase and decrease.
If Siemens changes item 7 or 38, Metso can just correct the reverse output.
Hello, if Metso directly corrects the reverse output, won’t the direction of action also change? For example, I used to be an AFC, but after correcting the reverse output, wouldn’t it become an AFO?