HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Can packing areas be set up in Class A and Class B warehouses?

2016-10-12View Original

Thread Content

As the title suggests, is it possible to set up a packing area for simple operations such as pallet wrapping?
Reply #22016-10-12
No, a warehouse is defined for storage purposes, and no other types of operations should take place there
Reply #32016-10-12
Basis: Code for Fire Protection Design of Buildings GB50016-2006, 3.3.15 – Employee dormitories are strictly prohibited in warehouses. Offices, rest rooms, etc. are strictly prohibited in Class A and Class B warehouses, and they should not be built adjacent to them either. It is possible to designate a packaging area, but it must meet the explosion-proof design requirements: first of all, the motor of the winding machine must be explosion-proof ; The wiring method uses explosion protection ; Other packaging tools on the same machine must be explosion-proof ; It’s very difficult to meet the requirements ; A packaging area can be designated within the warehouse ;
Reply #42016-10-14
In my opinion, the requirements for logistics buildings as specified in Article 3.3.10 of the \"Code for Fire Protection Design of Buildings\" GB50016-2014 can be referred to: when the primary function of a building is storage, or when it is difficult to determine the main function of such a building, the provisions related to warehouses in this code should be applied. However, when areas for sorting and other operations are completely separated from the storage areas by firewalls, the fire protection requirements for these operational areas and storage areas can be determined separately according to the provisions related to factories and warehouses in this code.
Reply #52016-10-16
Personally, I think as long as electrical equipment is not involved, it’s not a big problem and it’s fine. Waiting for the expert...
Reply #62016-10-16
It is not appropriate to set up packing areas in Class A and Class B warehouses; in my opinion, packing areas should be located in a separate buffer zone
Reply #72016-10-20
The design firm stated that they consulted the entity responsible for drafting the building codes, and were informed that logistics warehouses are generally classified as Category C, with Categories A and B not being applicable.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.