October 25, 2016 Multiple Choice Question (3 points for participation, 8 points for correct answer)
Thread Content
This post was last edited by hai8487 on 2016-10-25 08:36. Reasons for water in waste steam and solutions ( ) A. Excessively high liquid level control. Keep it at a reasonable liquid level; the pressure in pipeline network B drops suddenly. Contact the dispatching team to control the pressure in the pipeline network, and monitor the level of the waste boiler fluid. The high salt content in Waste Boiler C is causing azeotropy between steam and water. Control the amount of alkali added and the waste discharge. The deadline for answering this question is within two days; there will be no extension! ! ! ! ! ! ! ! ! ! ! ! ! ! ABC
The liquid level control is set too high. Keep it at a reasonable liquid level; the pressure in pipeline network B drops suddenly. Contact the dispatching team to control the pressure in the pipeline network, and monitor the level of the waste boiler fluid. The high salt content in Waste Boiler C is causing azeotropy between steam and water. Control the amount of alkali added and the wastewater discharge